Screed Replacement Tile
The natural dry screed
There are many good reasons for ceramic dry screed.
01
Dry instead of wet. An end to dampness on the building site.
In many buildings, moisture problems and complaints arise due to the installation of a wet screed – this has now come to an end thanks to the Screed Replacement Tile. The ceramic dry screed does not introduce moisture into the building and structural damage is avoided!
02
Time saving for your construction program.
No more long drying-out times of 4-6 weeks! The floor can be walked on after 24 hours – and load can be applied after 48 hours, without cracking or expansion joints.
03
Greater ceiling heights and a joy to install.
The Screed Replacement Tile system is only 18 mm thick – one third the thickness of a traditional screed. The Screed Replacement Tile is ideally suited for renovations. The ease and speed with which the Screed Replacement Tile can be installed is sure to impress.
04
High thermal conductivity, heat retention flexibility.
As a result of the Tiles’ high-quality manufacture incorporating more than 30% fireclay content, the Screed Replacement Tile boasts outstanding thermal conductivity and exceptional heat retention. The Screed Replacement Tile system offers you flexibility of design too – it is compatible with all other floor finish choices such as solid wood planks, parquet, large-format tiles up to 1.20 x 1.20 m, laminate, linoleum or carpet.
An optimal combination.
Screed Replacement Tiles and underfloor heating.
Screed Replacement Tiles and underfloor heating
05
Low energy consumption, high economic efficiency, comfortable environments
By using the Screed Replacement Tile, you could save up to 30% on your annual heating costs. When an underfloor heating system is installed below the Screed Replacement Tile, a significantly lower flow temperature can be used. Heat is rapidly transferred to the room and guarantees user comfort.
06
Design screed tiles as a finished flooring
Our Design Screed Tiles are the alternative to natural stone or tiles. Specially refined, it fulfils all demands for high quality and comfort in your home. You benefit from all the unique advantages of the Screed Replacement Tile (compatibility with underfloor heating, increased room height, etc.) in addition to an aesthetically pleasing floor covering in one elegent product. The joint pattern can also be varied by using dark or light-coloured adhesive.
07
Both natural and robust
The natural and environmentally friendly Screed Replacement Tile is made of the four elements: fire, water, earth and air. It is fired at 1200 degrees. High compressive and flexural strength ensure extraordinary durability. The Screed Replacement Tile can bear impressive point loads and imposed loads. It does not absorb moisture and so is suitable for installation in wet areas.
08
WATER RESISTANT
The TONALITY Screed Replacement Tile is a waterproof dry screed. It will not dissolve, swell or shrink due to moisture ingress. The ceramic dry screed does not introduce moisture into the building and prevents structural damage.
09
SUITABLE FOR ANY FLOOR COVERING
As a load distribution layer, the Screed Replacement Tile creates a substructure that can be used for all types of flooring (tiles up to 1.20 x 1.20 metres, natural stone finishes, all types of parquet, solid wood planks, laminates, PVC, carpet, linoleum and terrazzo floors).
10
EASIEST INSTALLATION
The Screed Replacement Tile is quick and easy to install using only normal tiling tools. The Screed Replacement Tiles can be laid in temperatures as low as 5°C using TONALITY’s special high strength adhesive.
Design screed tiles
Design meets quality
Our design screed is the alternative to natural stone or tiles. Specially refined, it meets all demands for high quality and well-being in living spaces.
To the design screed tile