Underfloor Heating | Screed brick

Low energy consumption und hohe Wirtschaftlichkeit Due to high thermal conductivity

The high thermal conductivity of 1.30 W/mK (conventional wet screed ~0.35 to 0.38 W/mK) and the low mass of the screed tile ensure optimum conditions for cost-saving and environmentally conscious heating.

The combination of underfloor heating and the screed replacement tile requires lower flow temperatures, which means that the heat is transferred to the room more quickly and ensures comfort. By using the screed brick, you can save up to 30 % on heating costs annually.

HEAT PUMP AND SCREED REPLACEMENT TILES

A heat pump – at its simplest a refrigerator running in reverse – uses the heat stored in the ground or air for heating and hot water production. Heating energy costs are reduced because up to 75% of the heating energy transferred to the building is derived from free and readily available heat sources. The high thermal conductivity and low mass of Screed Tiles in combination with a heat pump represents the ideal synthesis between cost-saving and environmentally conscious heating. NB: This only applies when used in conjunction with an approved underfloor heating system. We would be delighted to provide you with more information.

Electric panel heating - heating paper

Ceramic screed replacement tile with heating paper

The combination of screed replacment tiles and heating paper offers a sustainable and cost-effective alternative to conventional heating systems. It enables the use of renewable energies such as solar energy, including self-sufficient heating, and offers numerous advantages.

Advantages of the heating system with heating paper

Cost-efficient: no investment in expensive heating technology, hardly any maintenance and heating costs
Fast preheating: no pipe routes
Low installation height: 18 mm (screed replacement tile and heating paper)
Space-saving: no heating technology or buffer tank required
Energy-efficient: fast response time
No restrictions: no noise, no visual impairment of the surroundings
Flexible application possibilities: Floors, ceilings and walls
Sustainable and cost-effective: operation with own solar energy

Water-based heating system - heat pump

Heat pump and Screed Replacement Tiles

A heat pump – the reverse principle of a refrigerator – uses the heat stored in the ground or air for heating and hot water. Heating energy costs are reduced as up to 75% of the heating energy required is obtained from free heat sources. Brine/water heat pumps, outdoor air heat pumps and geothermal systems can be used to generate energy. The high thermal conductivity and low mass of the screed tile, in combination with a heat pump, represent the ideal synthesis between cost-saving and environmentally conscious heating.

Synergy effect design screed tiles

Finished floor with design screed

The Screed Replacement Tile system is available as a finished floor covering too. Both the screed and finished floor are combined in one product, saving time, money and construction height. Any design can be printed on the tile during its manufacture with no extensive lead time.

An optimal Combination

Screed Replacement Tiles and underfloor heating

THE POSITIVE EFFECT OF THE SCREED REPLACEMENT TILES IN COMBINATION WITH UNDERFLOOR HEATING